Filter
Top Products
no valid ETE for the leg, dashes will replace the
value.
EUG to SLE
1 353° 48.0nm
ETE 00:27
ETE?
ETE? is the same as ETE, except the Estimated
Ground Speed is used for the calculation. See
Estimated Ground Speed on page 16 for more details.
EUG to SLE
1 353° 48.0nm
Leg ETE? 00:24
Fuel To?
Fuel shows the amount of fuel required to get from
the FROM waypoint to the TO waypoint for an
inactive plan or from the present position to the TO
waypoint for the Active flight plan. See Estimated
Ground Speed on page 16 for more details.
EUG to SLE
1 353° 48.0nm
Fuel To? 32usg
In the Active flight plan, the Fuel? Calculation uses
the Estimated Fuel Usage value and the actual
ground speed. The Estimated Fuel Usage value must
be greater than zero, and the actual ground speed
must be greater than 5 knots. If there is no valid Fuel?
for the leg, dashes will replace the value.
In an inactive flight plan, the Fuel? calculation uses
the Estimated Fuel Usage value and the estimated
ground speed. The Estimated Fuel Usage value must
be greater than zero, and the actual ground speed
must be greater than 5 knots. If there is no valid Fuel?
for the leg, dashes will replace the value.
6-8
Flight Plan Functions