Filter
Top Products
Section 6–Changing the Electrical Downtilt-Single ATC200-Lite Teletilt
®
Remote Control Downtilt System
6-4 May 2005 Bulletin 639510
7. At the successful completion of an antenna movement, the ‘Current Tilt’ eld will update
to show the new tilt angle and the ‘New Tilt’ text entry box will be cleared in preparation
for the next move (Figure 6-4). At this point, you may click on the ‘Close’ button to exit this
screen and return to the main screen. Alternately, this process may be repeated to further
adjust the downtilt or to reapply changes where movement had previously failed, such as
a temporary mechanical jam.
8. After closing the ‘Set Antenna Tilt’ screen, the main screen will show the new electrical
downtilt setting in the ‘Device Information’ list.
After all electrical tilt adjustments are made and you are ready to end the program session,
a report can be saved to a le for future reference (see Section 8).