Filter
Top Products
12
English
New Discs
– CD –
As a protective measure, the CD player will
automatically eject discs that have either been
inserted incorrectly or have irregular surfaces. If
a new disc is ejected immediately after loading,
use your finger to feel around the outer edge of
the CD and its center hole. If you feel any small
bumps or irregularities, this could inhibit proper
loading of the disc. To remove the bumps, rub
the inside edge of the hole and outside edge of
the disc with a ball-point pen or other such
instrument, then insert the disc again.
– MD –
Before inserting an MD
Use your finger to feel around the outer edge of
the MD. If you feel any small bumps, remove
the bumps before inserting.
Inserting an MD with bumps could severely
damage the mechanism.
Handling Magazine
When discs are being exchanged in the MDA-
W890, the magazine is pushed out from the
changer. While this operation is in progress, do
not try to pull out the magazine or stop its
movement in any way, as this could cause
damage to the mechanism. In addition, be
aware of the changer's operation so it will not
interfere with your driving. For example, before
changing gears, check the position of the
magazine so as not to hit it while it is changing
discs.
CAUTION:
Do not insert anything other than magazine into
insertion slot.
Precautions
Bumps
Résidus
Abultamientos
Center Hole
Orifice central
Orificio central
IMPROPER
INCORRECT
INCORRECTO
IMPROPER
INCORRECT
INCORRECTO
New Disc
Disque neuf
Disco nuevo
Center Hole
Orifice central
Orificio central
Outside (Bumps)
Périférie (résidus)
Borde exterior
(abultamientos)
Bumps
Résidus
Abultamientos