Filter
Top Products
32-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
3 Press or to select “COUNTRY CODE,” then press
ENT.
4 Press or to select AUTO or OTHERS.
If AUTO is selected, press ENT.
AUTO: The primary country code among those recorded
is played.
OTHERS: The setting content changes to “OTHER” if the
desired country code is input.
If AUTO is selected, go to step 6. If OTHERS is selected,
go to step 5.
5 Use the numeric keypad “0” to “9” to input the 4-digit
country code, then press ENT.
Example: Germany “6869” is input
6 When the setting is complete, press SETUP.
The setup returns to normal mode.
• If you want to change the password, select “CHANGE PASSWORD”
in step 3. Input the new password (4 digits) and press ENT.
• Write down the password on a piece of paper and store the piece of
paper somewhere in case you forget it.
• If the input code is wrong, the unit returns to the country code input
display, after displaying “CODE ERROR” for 3 seconds.
• For the country codes, refer to “List of Country Codes” (pages 55
and 56).
• Can be erased one digit at a time each time CLR is pressed. Press
CLR for at least 2 seconds to delete all digits.
• Press RETURN to return to the previous screen.
Setting the Rating Level (Parental Lock)
Use this function to restrict the viewing of movies to children of
appropriate age levels only.
Setting item: PARENTAL
Further setting item: PARENTAL LEVEL
1 Press or to select “PARENTAL,” then press ENT.
The password input mode is activated.
2 Use the numeric keypad “0” to “9” to input the 4-digit
password, then press ENT.
PASSWORD * * * *
Input numbers are displayed as “*.“
The default password is 1111 upon shipment from the
factory.
The restriction level (PARENTAL LEVEL) input display
appears.
• Can be erased one digit at a time each time CLR is pressed. Press
CLR for at least 2 seconds to delete all digits.
• Press RETURN to return to the previous screen.
• If the password is wrong, the unit returns to the password input
display, after displaying “PASSWORD ERROR” for 3 seconds.
3 Press or to select “PARENTAL LEVEL,” then press
ENT.
4 Press , , or to select the restriction level (1 to 8),
then press ENT.
Select “OFF” to cancel the parental lock or if you do not
want to set a rating level.
The lower the number, the higher the rating level.
• Press RETURN to return to the previous display.
5 When the setting is complete, press SETUP.
The setup returns to normal mode.
• If you want to change the password, select “CHANGE PASSWORD”
in step 3. Input the new password (4 digits) and press ENT.
• Write down the password on a piece of paper and store the piece of
paper somewhere in case you forget it.
• On unrated DVDs, playback will not be restricted even if the rating
level is set.
• Once set, this rating level remains in memory until changed. To
enable the play of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are unsure
about a DVD, play it first to confirm. Do not leave DVDs accessible
to young children for whom you deem them inappropriate.
Tips
• Changing the rating level temporarily
Some discs may request that you change the rating level set
in the default settings during playback. In this case, the
message appears on the monitor screen “PARENTAL
LEVEL CHANGE OK?”
• To change parental level and play, press ENT.
The password input mode is displayed. Input the 4-digit
password you set in “Setting the Rating Level (Parental
Lock)”, then press ENT.
• To play without changing the parental level, press .
(When is pressed, playback will be at the parental level
set with “Setting the Rating Level (Parental Lock).”)
PARENTAL
>>
LEVEL
OFF
87654321
SE
T
UP
01GB00DVA9861Ri.book Page 32 Wednesday, December 7, 2005 12:00 PM