Filter
Top Products
13-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
PTY (Programme Type) Tuning
1
Press FUNC. so that the “FUNC” indicator lights up.
2
Press 3 PTY to activate the PTY mode, while the
unit is in Radio (FM receiving) mode.
The Programme Type of the station being currently received
will be displayed for 10 seconds.
If there is no receivable PTY broadcast, “NO PTY” will be
displayed for 10 seconds.
If no RDS station can be received, the display shows “NO
PTY.”
• If no operation is performed within 10 seconds after pressing 3 PTY,
the PTY mode will be automatically cancelled.
3
Press and within 10 seconds after
activating the PTY mode to choose the desired
programme type while the PTY (programme type) is
being displayed.
Each press scrolls the programme type by one.
4
Press 3 PTY within 10 seconds after selecting the
programme type to start searching for a station in
the selected programme type.
The chosen programme type display blinks during
searching and lights when a station is found.
If no PTY station is found, “NO PTY” will be displayed for 10
seconds.
5
Press FUNC. to activate the normal mode.
The “FUNC” indicator goes out.
• Operate the unit while the “FUNC” indicator lights up. If no
operation is performed within 10 seconds, the “FUNC” indicator
goes out.
Receiving Traffic Information While
Playing CD or Radio
1
Press TA so that the “TA” indicator lights up.
2
Press and to select a traffic information
station if necessary.
When a traffic information broadcast starts, the unit
automatically mutes the CD player/changer or the regular
FM broadcast.
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.
When traffic information stations cannot be received:
In the tuner mode:
When the TP signal can no longer be received for over 1
minute, the “TA” indicator blinks.
In the CD mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
• The receiver is equipped with the EON (Enhanced Other Networks)
function in order to keep track of additional alternate frequencies to
the AF list. The “EON” indicator lights up while an RDS EON
station is being received. If the station being received does not
broadcast the traffic information, the receiver automatically tunes in
the related station that broadcasts the traffic information when it
occurs.
3
Press TA to deactivate the Traffic Information mode.
The “TA” indicator goes out.
Priority News
This function allows you to give priority to the News programme. You
will never miss the News programme as the unit automatically gives
priority to the News programme whenever it begins broadcasting, and
interrupts the programme you are currently listening. This feature is
functional when your unit is set to a mode other than the LW and MW
modes.
1
Press FUNC. so that the “FUNC” indicator lights up
while the unit is in Radio (FM receiving) mode.
2
Press NEWS 2 to activate the PRIORITY NEWS
mode.
The “NEWS” indicator appears in the display.
To disable the PRIORITY NEWS function, press NEWS 2.
• In the PRIORITY NEWS function, unlike in the TA function, the
volume does not increase automatically.
3
Press FUNC. to activate the normal mode, while the
unit is in Radio (FM receiving) mode.
The “FUNC” indicator light goes out.
LIGHT M CLASSICS OTHER M
01GB00DVA9861Ri.book Page 13 Wednesday, December 7, 2005 12:00 PM