Filter
Top Products
21-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
Selecting Programme/Playlist
During playback or pause, press , on the unit or
UP, DN on the remote control to select the previous or
next programme/playlist.
The programme/playlist switches each time the button is
pressed, and playback of the selected programme/playlist
starts.
• Only when a playlist is managed on the disc, playlist can be selected
and operation can be performed.
Playing Still Frames (pausing)
1
During playback, press / .
2
Press / to resume playback.
• No sound is played during the still mode.
• The image or sound may stop temporarily when playback starts from
the pause mode. This is not a malfunction.
Forward/reverse frame-by-frame
Playback
1
In the pause mode, press or .
The picture advances or reverses by one frame each time
the button is pressed.
2
Press / to resume normal playback.
• No sound is output during forward/reverse frame-by-frame playback.
• For DVD-VR and video CD, reverse frame-by-frame playback is not
available.
Slow Motion Playback
1
When or is pressed and held in while in
the pause mode, the 1/8th speed slow motion
playback mode is set.
When held in for 5 more seconds, the slow motion speed
switches to 1/2 the normal speed.
2
Release or to pause, and press / to
playback.
• No sound is played during slow motion playback.
• Slow playback is not available when playing back a slide show.
• 1/2 and 1/8 are approximate speeds. The actual speed differs from
disc to disc.
• For DVD-VR and video CD, reverse slow motion playback is not
available.
Searching by Title Number
Use this function to easily find positions on the DVD using the DVD’s
title.
• This operation is performed by the remote control unit.
1
When playback stops, input the number of the title
you want to play using the numeric keypad (“0” to
“9”).
2
Press ENT.
Playback starts from the selected title number.
• While in PRE-STOP, this function finds the beginning of the chapter
by its number.
• This function cannot be used on discs on which no title numbers are
recorded.
• Press CLR to delete the last digit in the title number. Press and hold
CLR for at least 2 seconds to cancel the input mode.
• The playback starts automatically for two digit title numbers even if
ENT. in procedure 2 is not pressed.
Searching by Group Number
A group number on a DVD identifies various audio sections similar to
chapters for video. Use this function to easily find positions on the DVD
using its group number.
• This operation is performed by the remote control unit.
When playback stops, input the number of the group you
want to play using the numeric keypad (“0” to “9”).
Playback starts from the selected group number.
• While in PRE-STOP, this function finds the beginning of the track by
its number. For operation, refer to “Searching Directly by Chapter or
Track Number” (page 22).
• This function cannot be used on discs on which no group numbers
are recorded.
Searching by Programme or Playlist
Number
Use this function to easily find positions on the DVD using the DVD’s
programmes/playlists.
• This operation is performed by the remote control unit.
1
When playback stops, input the number of the
programme or playlist you want to play using the
numeric keypad (“0” to “9”).
2
Press ENT.
Playback starts from the selected programme or playlist
number.
• While in PRE-STOP, this function finds the beginning of the chapter
by its number.
• This function cannot be used on discs on which no programme or
playlist numbers are recorded.
• Press CLR to delete the last digit in the programme/playlist number.
Press and hold CLR for at least 2 seconds to cancel the input mode.
• Depending on the number of digits input, playback may start
automatically even if ENT. is not pressed in step 2.
, UP: Press this to start playback from the beginning of the
following programme or playlist.
, DN: Press this to start playback from the beginning of the
previous programme or playlist.
01GB00DVA9861Ri.book Page 21 Wednesday, December 7, 2005 12:00 PM