Filter
Top Products
35-EN
Press VSOURCE to select the BLUETOOTH Audio mode.
1
Press .
Returns the beginning of the song being played back.
2
Press .
Forwards the next song.
Pressing and holding or will fast backward/fast
forward track continuously.
Note
• The action depends on the paired device.
Press .
A playback stops. Pressing again will resume a playback.
Press 1 or 2 to select the desired Group (Folder).
Pressing and holding 1 or 2 will change folders
continuously.
Note
• This function may not available depending on the paired device.
Artist name, album name, etc., may be searched and displayed during
playback or pause.
1
Press ENTER to activate the search mode.
2
Turn the Rotary encoder to select the desired Group
(Folder), and then press ENTER.
3
Turn the Rotary encoder to select the desired album,
folder, etc., within the selected Group (Folder), and then
press ENTER.
4
Repeat step 3 if necessary until the desired song is found.
Notes
• Search mode may differ depending on the connected device.
• The pause mode may be canceled after the search.
• This function may not available depending on the paired device.
Connecting the Flash Memory (optional)
If a Flash Memory device is connected to the unit, MP3/WMA/AAC
files can be played back.
Playback
1
Press VSOURCE to select the USB mode.
2
Press or to select the desired track (file).
Pressing and holding or will fast backward/fast
forward track continuously.
3
To pause playback, press .
Pressing again will resume playback.
Notes
• Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/song name is
displayed.
• If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name, artist
name, and album name). All other tag data is ignored.
• If text information is not compatible with this unit, the display is blank.
• Before disconnecting Flash Memory, be sure to change to another source
or set to pause.
•Press kVIEW to switch the display. For details, refer to “Displaying
the Text” on page 22.
Recalling the Bluetooth Audio Mode
Selecting the desired Song
Pausing
Selecting the desired Group (Folder)
Searching for a desired song
Flash Memory (optional)
SOURCE
/ENTER
VIEW
/ II
1
2
4
5
Rotary encoder
Preset buttons
(1 through 6)