Filter
Top Products
18-EN
When the subwoofer is on, you can adjust the subwoofer output level
(refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/Balance
(Between Left and Right)/Fader (Between Front and Rear)/Defeat” on
page 16).
Setting item: Subwoofer
Setting contents:
OFF / ON (Initial setting)
OFF:
No subwoofer signal is output from the Subwoofer RCA
Connectors (refer to “Connections” on page 54).
ON:
The subwoofer signal is output from the Subwoofer RCA
Connectors (refer to “Connections” on page 54).
The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°). To adjust the level, turn the Rotary encoder.
Setting item: Subwoofer Phase
Setting contents:
0° (Initial setting) / 180°
When the subwoofer is on, you can select either System 1 or System 2 for
the desired subwoofer effect.
Setting item: Subwoofer System
Setting contents:
System 1/ System 2 (Initial setting)
System 1:
Subwoofer level changes according to the main volume setting.
System 2:
Subwoofer level change is different from the main volume setting.
For example, even at low volume settings, the subwoofer is still
audible.
Connecting to an External Amplifier
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
Setting item: Power IC
Setting contents:
OFF / ON (Initial setting)
OFF :
Use this mode when the line output of this unit is used to drive an
external amplifier. In this setting, the head unit’s internal amplifier
is turned OFF and can not drive speakers.
ON :
The speakers are driven by the built-in amplifier.
Note
• No sound is produced by the system when the Power IC is set to OFF.
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The CD and iPod, etc. will be able to
reproduce the music clearly even in cars with a lot of road noise.
Setting item: MX Setup
1
Turn the Rotary encoder to select the source to which you
want to apply Media Xpander, and then press ENTER.
Analog Tuner HD1 HD2 HD3&Other SiriusXM CD
CMPM
*
USB iPod BT Audio Pandora AUX
* Be applied for MP3/WMA/AAC files in disc.
2
Turn the Rotary encoder to select the Media Xpander
level, and then press ENTER.
OFF Level 1 Level 2 Level 3 Customize
Customizing the Media Xpander setting
If Customize is selected in step 2, you can modify the Media Xpander to
suit your personal preference.
3
Turn the Rotary encoder to select the Band, and then
press ENTER. Band1 (Low frequencies) Band3
(High frequencies)
Band1 (Bass) Band2 (Mid) Band3 (High)
4
Turn the Rotary encoder to adjust the level, and then
press ENTER.
LEVEL: 0 ~ 8
Turning Subwoofer ON/OFF
Setting the Subwoofer Phase
Setting the Subwoofer System
External Device
Setting the Media Xpander mode
(MX Setup)
OFF:
Front
Left
Amplier
Front
Right
Rear
Left
Amplier
Rear
Right
ON:
Speakers
SPEAKER
RIGHT FRONT
Front
Right
SPEAKER
RIGHT REAR
Rear
Right
SPEAKER
LEFT REAR
Rear
Left
SPEAKER
LEFT FRONT
Front
Left