Filter
Top Products
31-EN
2
Turn the Rotary encoder to select the name of the device
to be connected from the Device Search list and then
press ENTER.
3
If this unit is successfully connected to a BLUETOOTH
compatible device, “Connected” is displayed, and then the
unit returns to normal mode.
Depending on the Smartphone, it may be necessary to input a
passcode. In this case, “Passcode 0000” is displayed. Input the
passcode “0000” in the BLUETOOTH compatible device to make
the pairing. After the pairing is completed, the unit will
automatically connect to the BLUETOOTH compatible device. If
you input the wrong passcode or the communication fails,
“Failed” is displayed.
You can flexibly customize the sound of a call to fit your own
preferences.
Setting item: Call Sound
Further setting items: VOL LV ADJ / Type Setup
Adjusting the volume (VOL LV ADJ)
You can emphasize or weaken the volume level of the Phone call, the
ring tone and the microphone input to fit your own preferences.
Setting contents:
Phone Talk:
−5 dB ~ +5 dB
Ring Tone:
−5 dB ~ +5 dB
MIC Gain:
−5 dB ~ +5 dB
Sound Type setting (Type Setup)
Depending on your calling environment, choose one of the settings
below which gives the best sound quality.
Setting contents:
TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5
TYPE1:
Standard Mode (recommended)
TYPE2:
Enhances the noise reduction
TYPE3:
Enhances the echo-cancel
TYPE4:
Enhances both noise reduction and echo-cancel
TYPE5:
Weakens both noise reduction and echo-cancel
Note
• The functions below are designed to improve the sound quality of the
outgoing call.
Noise reduction: This function can reduce the road noise, but excessive
enhancement may affect the sound quality of the call.
Echo-cancel: This function can reduce the echo, but excessive
enhancement may affect the sound quality of the call.
You can choose whether to use these functions according to the
following setting.
Setting item: Caller ID
Setting contents:
OFF / ON (Initial setting)
If you want to keep the ID information of the caller from others, set this
item to OFF. Depending on the stored ID information, while you are
dialing a number or a call is dialing in, only telephone number will be
displayed or telephone name will be displayed as “NO Name”; During a
call, “NO Name” will be displayed.
You can update the phone book automatically or manually.
Setting item: PB Update
Further Setting contents: Auto / Manual
Setting the Phone Book Auto Update ON/OFF
(Auto)
When you select ON in this step, whenever the vehicle’s ignition is
turned ON or after the phone is reconnected with this unit, the phone
book will be updated automatically.
Setting contents:
OFF / ON (Initial setting)
Note
• “Updating” will be displayed during the phone book update.
Setting the Phone Book Manual Update ON/OFF
(Manual)
When you select YES in this step, the phone book will be updated
immediately regardless if the Auto update function is on or off.
Setting contents:
NO (Initial setting) / YES
Note
• “Updating” will be displayed during the phone book update.
The phone book is listed alphabetically by the first letter of First or Last
Name.
Listing by First Name is the default but Last Name can be selected.
Setting item: PB Order
Setting contents:
First Name (Initial setting) / Last Name
Note
• “Waiting” will be displayed while the Phone book order is switching.
You can cancel the “Waiting” screen to perform other operations by
pressing r when the ordering is still in progress. The phone book is
not accessible during this time. In addition, the ordering may affect the
playback of Bluetooth Audio.
Setting the BLUETOOTH sound quality
Setting the caller information display/
text message indicator ON/OFF
Setting the Phone Book Update
Changing the Phone book List Order