Filter
Top Products
29-EN
Setup Before Using
BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 meters. For details, refer to the BLUETOOTH
Home page (http://www.bluetooth.com).
Notes
• Depending on the BLUETOOTH version, a BLUETOOTH compatible
device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible devices
is not guaranteed. For handling of the BT compatible device, consult
your ALPINE dealer or ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations, be sure to stop your
car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the connected
device(s).
• When you search for this unit using the BLUETOOTH compatible
phone, the unit name is displayed as “Alpine CD Receiver”.
Before using the BLUETOOTH function, the following settings need to
be made.
Set “Bluetooth IN” to ON when you want to use
Hands-Free phone or Bluetooth Audio function. Refer to
“Setting the BLUETOOTH Connection (Bluetooth IN)” on
page 30.
Note
• Before using BLUETOOTH function, it must be paired with this unit.
Refer to “How to connect to a BLUETOOTH compatible device
(Pairing)” on page 29.
For details on the control from a BLUETOOTH compatible device, refer
to the Owner’s Manual of the BLUETOOTH compatible device.
Pairing a BLUETOOTH compatible device with
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
“Alpine CD Receiver” for pairing.
2
Turn the Rotary encoder to change the head unit display
from “Pairing NO” to “Pairing YES”, and then press
ENTER.
If “Pairing NO” is selected, the connection will be canceled.
3
If the pairing was successful, “Connected” is displayed for
a few seconds. The head unit then returns to its previous
state.
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
“Alpine CD Receiver” for pairing.
2
Input the passcode (“0000”) in a BLUETOOTH compatible
device.
Note
• The passcode is fixed as “0000”.
3
If the pairing was successful, “Connected” is displayed for
a few seconds. The head unit then returns to its previous
state.
Notes
• If the connection is unsuccessful, “Failed” is displayed.
• After a successful pairing, the two devices should reconnect
automatically whenever the vehicle’s ignition is turned ON. If the auto
connection fails, try to reconnect manually.
• Set “Visible Mode” to ON to enable this unit to be recognized by a
BLUETOOTH compatible device, refer to “Setting the Visible Mode” on
page30.
• You can also manually pair the BLUETOOTH devices from this unit.
For details, refer to “Pairing a BLUETOOTH Device from the unit” on
page30.
BT Hands Free Calling
About BLUETOOTH
/ VOICE CTRL.
/ II
SOURCE
BAND/
ABC SEARCH
/ENTER
VIEW
AUDIO/SETUP
2
1
Rotary encoder
Preset buttons
(1 through 6)
Before Using BLUETOOTH Function
How to connect to a BLUETOOTH
compatible device (Pairing)