Filter
Top Products
22-EN
Notes
• HPF (high pass filter): Cuts the lower frequencies and allows the higher
frequencies to pass.
• LPF (low pass filter): Cuts the higher frequencies and allows the lower
frequencies to pass.
• Slope: The level change (in dB) for a frequency change of one octave.
• The higher the slope value, the steeper the slope becomes.
• Adjust the slope to Flat to bypass the HP or LP filters.
• Do not use a tweeter without the HPF on or set to a low frequency, as it
may cause damage to the speaker due to the low frequency content.
• You cannot adjust the crossover frequency higher than the HPF or lower
than the LPF.
• Adjustment should be made according to the recommended crossover
frequency of the connected speakers. Determine the recommended
crossover frequency of the speakers. Adjusting to a frequency range
outside that recommended may cause damage to the speakers.
For the recommended crossover frequencies of Alpine speakers, refer to
the respective Owner’s Manual.
We are not responsible for damage or malfunction of speakers caused by
using the crossover outside the recommended value.
Displaying the Text
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc. while playing
MP3/WMA/AAC files.
Press kVIEW.
The display will change every time the button is pressed.
Note
• When the Text Scroll is set to Manual (refer to “Scroll Setting (Text
Scroll)” on page 27), press and hold kVIEW for at least 2 seconds,
the current text will be scrolled one time (except Radio mode).
The display in HD Radio mode:
The display in CD mode:
Low range
High range
(Dierent from actual display)
Level adjusting
(0 to −12 dB)
Output frequency range
Slope Flat
Slope adjusting
20 Hz
(Dierent from actual display)
HPF cut-o
frequency
LPF cut-o
frequency
Other Functions
SOURCE
BAND
/ENTER/OPTION
VIEW
/ II
Rotary encoder
Station Name
*1
BAND+PRESET NO.
Song Name
*1
FREQUENCY
CalendarArtist Name
*1
ClockPTY (Program Type)
BAND+PRESET NO.
FREQUENCY
Track No.
Elapsed Time
Text (Disc Name)
*2
Calendar
Text (Track Name)
*2
Clock
Track No.
Elapsed Time