Filter
Top Products
To change the audible channel in Multiplex function
Only the sound on the right channel can be heard from both
speakers.
When Multiplex is selected, “MPX L-ch” is displayed for 3 seconds
and changes to the selected function name. After the selected
function name is displayed, hold down the KARAOKE button
until MPX-R is displayed.
To return to the initial setting, select MPX-L.
When the power is turned off, MPX-L is restored.
m
s The Karaoke functions may not operate correctly with the
following kinds of CDs or tapes.
- Those with monaural sound
- Those recorded with strong echoes
- Those with the Karaoke recorded on the right or left side of
the sound width
* While the Karaoke function is on, the sound is output as
monaural.
● When the function is changed, the Karaoke function is canceled.
,.
KARAOKE PROGRAM
Before or during CD play, you can reserve up to 15 tracks to be
played after the current track. Each reservation is cleared when
it finishes playing.
Use the remote control
1
2
3
Press the PRGM button U.
Press the DISC DIRECT PLAY button, then press
one of the numbered buttons 1 to 3 within 3
seconds to select a disc.
Then, press the numbered buttons and the + 10
button to program a track.
Reserved disc number Reserved track number
Repeat step 2 to reserve other tracks.
4
I
I
Repeat step 2.
To check the reserved tracks
Press the CD E;DIT/CHECK button repeatedly. Each time it is
pressed, the disc number and track number are displayed in the
reserved order.
To stop play
Press the E button. When the 4> Ibutton is pressed, the play
starts from the last track again.
To skip a current track
Press the ➤* button. The skipped track is cleared from the
program.
To clear all the reservations
Press the ➤F button repeatedly until “K - POO” is displayed.
Press it once more to cancel the Karaoke pro{grams. The display
returns to that of CD play.
Kim
● If the reserved track number does not exist on the selected
disc, the unit stops playing and the display flashes.
In this case, press the ~> button to skip the error track. Then
press the + D> button to start play with the next reserved track.
● When the PRGM button is pressed repeatedly in step 1, PRGM
is displayed and the unit enters CD program play mode (page
12).
To cancel program play, press the II CLEAR button.
ENGLISH20