Filter
Top Products
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press Ihe TUNEFUBAND button to select a band.
2 Press the numbered buttons to select a preset
number.
Example:
Toselect preset number 20, press the +10, +10 and Obuttons.
To select preset number 15, press the +10 and 5 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the <> DIRECTION/PRESET button repeatedly. ‘
Each time the button is pressed, the next ascending number is
selected.
To clear a preset station
Select the p;eset number of the station to be cleared. Then, press
the
■ CLEAR button, and press the II SET button within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
❑
,
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval.
Press the POWER button while pressing the TUNER/BAND
#
button.
To reset the interval, repeat this procedure.
m
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
ENGL/SH 1~