Filter
Top Products
26
6.2 Now playing information
6.2 Now playing information 6.2 Now playing information
6.2 Now playing information
While the stream is playing, the screen shows its frequency, or if RDS information is available, station name
and any further RDS information such as programme name, track title and contact details. To view further
information about the broadcast, press INFO button.
Each time you press INFO button, another set of information is displayed, cycling through further RDS
information, frequency and today’ s date.
6.3 Settings
6.3 Settings 6.3 Settings
6.3 Settings
Scan settings
Scan settings Scan settings
Scan settings
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (hiss) from
weak stations. To change the scan settings to stop only at stations with good signal strength, select MENU >
SCAN SETTING > STRONG STATIONS ONLY? > YES.
Audio settings
Audio settings Audio settings
Audio settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-
noise ration (hiss). To play weak stations in mono, select MENU > AUDIO SETTING > FM WEAK
RECEPTION: LISTEN IN MONO ONLY > YES.
7 Alarms and sleep
7 Alarms and sleep 7 Alarms and sleep
7 Alarms and sleep
As well as a clock/calendar, there are two versatile wake-up alarms
with snooze facility, and a sleep function to turn the system off after a
set period.
7.1 Alarms
7.1 Alarms 7.1 Alarms
7.1 Alarms
To set or change an alarm, either press ALARM button or select
MENU > MAIN MENU > ALARMS.
Select the alarm number (1 or 2) then configure the following
parameters:
O ENABLE: ON/OFF,
O TIME,
O MODE: BUZZER, INTERNET RADIO, DAB OR FM,
O PRESET: 1-10,
O FREQUENCY: DAILY, ONCE, WEEKENDS OR WEEKDAYS,
O VOLUME:0 – 20.
When you have set the alarm, select Save to activate. The screen
shows active alarms with an icon at the bottom left.