AEG IR 4427 Radio User Manual


 
25
Each time you press INFO button, another set of information is displayed, cycling through DLS information,
programmed type, ensemble name/frequency, signal strength/error rate, bit rate/codec/channels and today’ s
date.
5.4 Settings
5.4 Settings 5.4 Settings
5.4 Settings
Dynamic range compression (DRC)
Dynamic range compression (DRC) Dynamic range compression (DRC)
Dynamic range compression (DRC)
If you are listening to music with a high dynamic range in a noisy environment (for example classical music
while cooking), you may wish to compress the dynamic range. This makes quiet sounds louder, and loud
sounds quieter. To change DRC, select MENU > DRC > then DRC OFF, LOW or HIGH.
Station order
Station order Station order
Station order
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid. Ensemble lists
groups of stations that are broadcast together on the same ensemble, for example BBC or South Wales local.
Valid lists valid stations first, alphanumerically, then off-air stations.
To change station order, select MENU > STATION ORDER > then ALPHANUMERIC, ENSEMBLE or VALID.
6 FM RADIO MODE
6 FM RADIO MODE 6 FM RADIO MODE
6 FM RADIO MODE
FM radio mode receives analogue radio from the FM band and
displays RDS (Radio Data System) information about the station and
show (where broadcast).
To enter FM mode, either press MODE button until the display shows
FM Radio or select MENU > Main menu > FM.
6.1 Selecting stations
6.1 Selecting stations 6.1 Selecting stations
6.1 Selecting stations
To find a station, press and hold the SCAN button until the frequency display starts to run up or down.
Alternatively, you can tune manually with quick presses of the SCAN button, or by pressing the ENTER button.
Once a station is tuned in, the Now playing screen shows the station name and any other information available
on RDS. If no information is available, just the frequency is shown.
Presets
Presets Presets
Presets
To store an FM preset, press and hold PRESET button until the display shows the Save preset screen. Select
one of the 10 presets to save the currently playing station.
To select a preset, press PRESET button briefly, then select one of the listed preset stations. When a preset
station is playing, it shows Pn (P1, P2 etc) in the bottom right of the screen.