40
OPERATION IN COPY, PRINTER,
AND SCANNER MODES
Some operations cannot be performed simultaneously when the machine is being used in printer mode, copy mode,
or scanner mode.
*
1
Can be used after pressing the [INTERRUPT] key.
*
2
Printing will begin when the [CLEAR ALL] key ( ) is pressed after the copy job is finished, or when the [ON LINE] key is
pressed to switch the machine online. Printing will also begin after the set auto clear time elapses, or after 60 seconds if auto
clear is disabled.
*
3
The print job is paused and copying begins. However, automatic two-sided copying is not possible. A two-sided print job will not
be paused and copying will not begin until the job is finished.
*
4
Scanning is possible when the machine and computer are connected using both the parallel and USB ports, and printing is set
to take place using the parallel port in the printer driver. In this case the scan job is stored and scanning begins when the print
job is finished.
*
5
The scan job is stored and scanning begins when the print job is finished.
*
6
The print job is stored in the computer and printing begins when the scan job is finished.
Modes Copying Printing
Scanning from a
computer
Scanning from
the machine
Copy
Copy key input
YesYesYesNo
During copying
Yes*
1
No*
2
No No
Printer During printing
Yes*
3
No Yes*
4
Yes*
5
Scanner
During scan preview/
during scanning
No No*
6
No No
