A SERVICE OF

logo

67
TROUBLESHOOTING
6
MISFEED IN PAPER TRAY 2
1
Open the side cover.
Grasp the handle to open
the side cover.
2
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
3
If the misfed paper is not seen in step
2, lift and pull out the lower paper tray
2 and remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
4
Close the paper tray.
The misfeed indicator
( ) will go out.
5
Close the side cover.
The indicator stops
blinking and copying can
be resumed.
Make sure that there is no misfed paper in the tray before pulling it out. (p.00, p.00)
Use the following procedure to remove misfeeds that occur in the optional 250-sheet/250-sheet x 2 paper feed
unit.
Note
If the misfeed indicator ( ) does not stop
blinking, check for torn pieces of paper in the
machine.
Note