11
BEFORE USING THE MACHINE
1
Display
Shows the set number of copies, as well as the copy
ratio, user program function or setting code, or an
error code when an error occurs.
When the [SCAN] key is pressed to enter scan mode,
the display shows the port used (U_1 for USB 1.1 or
U_2 for USB 2.0). When Button Manager is used, the
display shows a program number. (p.00, p00, p00)
Copy ratio display key
Hold down when the machine is not in use to
display the copy ratio in the copy quantity display.
(p.00)
ZOOM indicator
Lights up when a zoom ratio is set. (p.00)
Zoom keys
Use to select any reduction or enlargement copy ratio
from 25% to 400% in increments of 1%. (p.00)
INTERRUPT key and indicator
Interrupts a copy run. (p.00)
Light and Dark keys/indicators
Use to adjust the TEXT or PHOTO exposure level.
(p.00)
ORIGINAL SIZE ENTER key/indicators
Use to enter the original size. (p.00)
PAPER SIZE indicators
Shows the selected copy paper size. (p.00)
PAPER SIZE ENTER key
Use to set the paper size in the paper trays. (p.00)
SPR/RSPF indicator (when the SPF/RSPF is
installed)
Lights up when originals are set in the document
feeder tray. (p.00)
TRAY SELECT key
Use to manually select a paper tray. (p.00)
AUTO IMAGE key/indicator
Press for automatic copy ratio selection. (p.00)
Paper feed location/misfeed location indicators
The selected paper feed location is shown by a lit
indicator ( ). (p.00)
The general location of misfed paper is shown by a
blinking red indicator ( ). (p.00)
PRESET RATIO selector keys/indicators
Use to select preset reduction/enlargement copy
ratios. (p.00)
[ ] key
Use to check the total number of pages scanned.
(p.00)
Numeric keys
Use to select the desired copy quantity or to make
user program entries. (p.00)
READ-END key ( )
Use to check the total number of copies made
(p.00). To begin printing copies after the original
has been scanned for two-sided copying or other
copy jobs that use the document glass. (p.00)
START key
Press to make a copy (p.00). Also press to exit
"Auto power shut-off" mode and to set a user
program.
CLEAR ALL key
Clears all selected settings and returns the
machine to the initial settings. (p.00)
CLEAR key
Clears the copy quantity display or terminates a
copy run.
ORIGINAL DATA
SORT
AUDIT CLEAR
AUTO PAPER SELECT
POWER SAVE
INTERRUPT
CLEAR
CLEAR ALL
START
ZOOM
READ-END
PRESET RATIO
AUTO
IMAGE
TRAY
SELECT
ORIGINAL SIZE
ENTER
AUTO
ORIGINAL
SIZE
PAPER
SIZE
TEXT
PHOTO
135
11
X
17
200
%
100
%
50
%
141
96
77
64
129
121
8½
X
14
8½
X
11
8½
X
11
8½
X
5½
EXTRA
25 400%
2 IN 1
4 IN 1
GROUP
EDGE
ERASE
MARGIN
SHIFT
CENTER
9
10 11 12
7 8
13 14 15 16
17
18 19 20 21
22 23 24 25 26 27
28 29 30 31 32 33 34 35 36
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
