27
COPY FUNCTIONS
2
Using the document glass
1
Place the original that you wish to
copy onto the front side of the paper
on the document glass and close the
document cover/SPF/RSPF.
2
Select the original size. (p.00)
3
Press the [ORIGINAL TO COPY] key,
and make sure that the
indicator is lit.
4
Press the [START] key ( ).
The indicator blinks, and the original is
scanned into memory.
5
Remove the first original and then
place the original that you wish to
copy onto the back side of the paper
on the document glass. Close the
document cover.
Place the second original
in the same orientation
as the first original.
6
Press the [START] key ( ).
The copy will be delivered to the output tray.
Using the SPF/RSPF
1
Place originals in the SPF/RSPF.
(P.00)
If you place an odd number of originals for
one-sided to two-sided copying, the last page will
be one-sided.
2
Press the [ORIGINAL TO COPY] key
and select the two-sided copy mode
that you wish to use.
When using an RSPF,
the copy mode is
selected in the following
order:
• one-sided to two-sided
• two-sided to two-sided
• two-sided to one-sided
3
Select the number of copies and other
copy settings, and press the [START]
key ( ).
The copy will be delivered to the output tray.
• If you need to clear the data scanned into
memory, press the [CLEAR ALL] key ( ).
• If you wish to cancel two-sided copying and
just make a copy of the first original, press
the [READ-END] key ( ).
Note
1
2
The first original
The second original
• To cancel automatic two-sided copying,
press the [CLEAR ALL] key ( ).
• Do not touch the reversing tray while
automatic two-sided copying is in progress.
Note
