A SERVICE OF

logo

Fuse Replacement for the VX7
The VX7 uses a 100V, 10A time delay (slow blow), high current interrupting rating fuse that is
externally accessible and user replaceable. Should it need replacement, replace with same
size, rating and type of fuse – Littlefuse 0234010 or Optifuse MSC-10A (5x20mm).
1. Turn the VX7 off and disconnect the power cable from the VX7.
Caution:
Fuse has voltage on it even when power is off. Always disconnect
input power before changing fuse.
2. While holding the VX7 over a level surface, push the fuse cover in and twist it one quarter
turn counterclockwise. A flat head screwdriver may be used to twist the fuse cover.
3. Remove the fuse.
4. Discard the fuse and place a new fuse in the holder.
5. Push the fuse in and twist it clockwise one quarter turn.
6. Reconnect the power cable to the VX7.