A SERVICE OF

logo

How To: Connect VX7 without a UPS Battery Pack
1. Connect the power cable to the vehicle’s electrical system as described in “Connect Vehicle
12-80VDC Connection”.
2. Connect the power cable to the VX7 by aligning the water-tight connector pins to the power
connector on the bottom of the VX7; push down on the water-tight connector and twist it to
fasten securely.
3. Turn the VX7 on.
How To: Connect VX7 to a Integrated Mount UPS Battery Pack
1. Connect the power cable to the vehicle’s electrical system as described in “Connect Vehicle
12-80VDC Connection”.
2. Connect the power cable to the UPS battery pack by aligning the water-tight connector pins
to the input connector (labeled “From Vehicle”); push down on the water-tight connector and
twist it to fasten securely.
3. Connect the output cable (labeled “To Computer”) from the UPS battery pack to the power
connector on the bottom of the VX7 by aligning the water-tight connector to the power
connector; push down on the water-tight connector and twist it to fasten securely.
4. Turn the VX7 on.