UPS Battery Pack Remote Mount
The optional UPS battery pack must be mounted remotely when using the RAM mount system
or a U-bracket designed for a previous model LXE computer. The remote mount can also be
used with the VX7 U-bracket assembly if it is not convenient to mount the UPS battery pack to
the U-bracket.
A six foot extension cable is available to connect the UPS battery pack to the VX7.
1. Position the UPS battery pack to allow cables to reach the vehicle battery and the VX7.
2. Attach the UPS battery pack to the vehicle mounting surface using two 1/4 bolts, lock
washers and flat washers (or equivalent) fasteners.
Note:1/4 Bolts and washers not included.
IMPORTANT: Mount to the most rigid surface available.
Connect Keyboard
LXE Keyboard
The VX7 has an external 9-pin connector for the keyboard. All LXE keyboards are connected in
a similar fashion. The keyboard is attached to the connector labeled “KEYBOARD”. The
keyboard receives power from the VX7.
1. Turn the VX7 off before attaching the keyboard cable.
2. Insert the keyboard cable into the VX7 keyboard connector.
3. Once the pins are firmly seated, tighten (turning clockwise) the thumbscrews.
4. Secure the cable with a strain relief cable clamp.
5. Turn the VX7 on.
