A SERVICE OF

logo

ENWW External section 63
Finisher
disassembly/assembly
Removing and reinstalling the top
cover/2
CAUTION Make sure that the power
cord of the MFP is
unplugged from the power
outlet.
Uninstall the PI (optional) if
installed.
Procedure
1 Remove the top cover/1.
2 Open the front door.
3 Remove four screws, and pull out the
upper tray. Then remove the top cover/2.
4 Reinstall the above parts following the
removal steps in reverse.
Removing and reinstalling the
side cover
CAUTION Make sure that the power
cord of the MFP is
unplugged from the power
outlet.
Procedure
1 Open the front door.
2 Remove three screws, and remove the
side cover.
3 Reinstall the above parts following the
removal steps in reverse.
Screws
Side cover