A SERVICE OF

logo

ENWW External section 23
ADF disassembly/assembly
3 Open the ADF to the upright position.
4 Remove four connectors (CN612 to
CN615) from the scanner drive board
(SCDB) on the MFP.
5 Remove four screws to detach the cable
conduit.
6 Pull the cable to the top of the MFP.
7 Close the ADF. Remove three screws to
detach each of two fixing plates.
Connector
(CN614)
Connector
(CN615)
Connector
(CN613)
Connector
(CN612)
Scanner drive board
(SCDB)
Cable conduit
Screws(4)
Fixing plate Fixing plate
Screw Screws(2)