A SERVICE OF

logo

Columns and Fittings
Inlet/detector liners/adapters
22
Detector liners/adapters
Liner/Adapter
Typical Installed Detector Liner/Adapter
Figure 1-6
Detectors require a liner/adapter to be installed when used with packed
metal columns (either 1/8•or 1/4•inch),and with any type of capillary
column. Normally, no liner is required with 1/4•inchpacked glass
columns, since the leg of the column itself serves as the liner.
For the FID or NPD, the correct detector jet must be installed prior to
installation of the liner. (If jets must be exchanged, see Chapter 8,
Preventive Maintenance.)