Filter
Top Products
45
English
PLAYING A SOURCE
1. Set the master VOLUME control to minimum.
2. Turn the power on.
3. Select an input source.
The selected source is shown by the display panel and the
monitor screen. For the source that inputs two or more types of
signals to this unit, its current input mode is also shown.
* To change the input mode, press the INPUT MODE switch on
the front panel or the input selector key for the currently
selected source on the remote control unit. (See page 46 for
details on switching the input mode.)
* To select a tape deck connected to this unit’s TAPE 2 jacks,
press the TAPE 2 MONITOR switch. (Otherwise, turn this switch
off.)
4. Play the source.
5. Increase the setting of the master VOLUME control to your
listening level.
Adjust the BASS, TREBLE, BALANCE controls, etc., or select a
desired sound field program. (See page 49.)
NOTE: If a different audio source is selected with the input selector
keys on the remote control unit while enjoying a video source, the
sound from the newly selected audio source is heard, but the picture
from the video source can still be seen.
GENERAL OPERATION
VOLUME
POWER
POWER
VOLUME
MASTER
VOLUME
VCR 3/DVD
VIDEO AUX
INPUT SELECTOR
VCR 2
VCR 1
TV/DBS
LD
TAPE 1
TUNER
CD
PHONO
CD
TAPE 2
MONITOR
Front panel
or
or
Remote control
Front panel
Front panel
Front panel
INPUT MODE
Front panel
or
Remote control
Front panel
or
Remote control
I NPUT CD
AUTO : PCM
CD
Remote control