Yamaha RX-V861 Stereo Receiver User Manual


 
72 En
Customizing this unit (MANUAL SETUP)
Use this feature to manually adjust speaker settings or
compensate for video signal processing delays when using
LCD monitors or projectors. Most of the SOUND MENU
parameters are set automatically when you run AUTO
SETUP (see page 28).
Speaker settings A)SPEAKER SET
Use this feature to manually adjust any speaker settings.
Extra speakers assignment EXTRA SP ASSIGN
Selects the function of the speakers connected to the
EXTRA SP terminals.
Choices: FRONT B, ZONE2, PRESENCE, NONE
When you use the alternative front speaker
system (see page 38)
Select “FRONT B”.
When you use the Zone 2 speakers
(see page 91)
Select “ZONE2” to set the function of the speakers to
the Zone 2 speakers.
When you use the presence speakers
(see page 12)
Select “PRESENCE” to set the function of the speakers
to the presence speakers.
When you do not use the EXTRA SP terminals
Select “NONE” to deactivate the EXTRA SP
terminals.
This parameter shares the value with the “EXTRA SP
ASSIGN” parameter in “AUTO SETUP”.
If you select “ON” in “BI-AMP” (see page 96), you cannot
select “PRESENCE” or “ZONE2” in “EXTRA SP ASSIGN”.
After changing the “EXTRA SP ASSIGN” setting, carry out
“AUTO SETUP” again (see page 28).
FRONT B speakers setting FRONT B
The “FRONT B” parameter is available only when you set
“EXTRA SP ASSIGN” to “FRONT B”.
Use this feature to select the location of the FRONT B
speakers.
Choices: FRONT, ZONE B
Select “FRONT” to turn FRONT A and B on or off
when the FRONT B speakers are set in the main room.
Select “ZONE B” if the FRONT B speakers are set in
another room. If FRONT A is turned off and FRONT B
is turned on, all the speakers including the subwoofer
in the main room are muted and this unit outputs sound
at the FRONT B terminals only.
If you connect headphones to the PHONES jack of this unit, the
sound is output from both the headphones and the speakers
connected to the EXTRA SP terminals when “FRONT B” is set
to “ZONE B”.
If a DSP program is selected when “FRONT B” is set to
“ZONE B”, this unit automatically enters the Virtual CINEMA
DSP mode (see page 46).
Presence/Surround back channel priority
PRIORITY
The “PRIORITY” parameter is available only when you
set “EXTRA SP ASSIGN” to “PRESENCE”.
Use this feature to prioritize either the presence or the
surround back speakers when playing sources that contain
surround back channel signals using the CINEMA DSP
sound field programs.
Choices: PRNS, SUR. B
Select “PRNS” to use the presence speakers even when
surround back channel signals are input. The signals
for the surround back channels will be output from the
surround speakers.
Select “SUR. B” to use the surround back speakers
when surround back channel signals are detected in a
CINEMA DSP program. The presence channel signals
are output from the front speakers.
1 SOUND MENU
Notes
MANUAL SETUP
1 SOUND MENU 1/2
. A)SPEAKER SET
B)SPEAKER LEVEL
C)SP DISTANCE
D)EQUALIZER
E)LFE LEVEL
[ ]/[ ]:Up/Down
p
p
[ENTER]:Enter
MANUAL SETUP
1 SOUND MENU 2/2
. F)DYNAMIC RANGE
G)AUDIO SET
H)HDMI SET
I)EXTD SUR.
[ ]/[ ]:Up/Down
p
p
[ENTER]:Enter
SOUND MENU
. EXTRA SP ASSIGN
ZONE2 >FRONT B
PRESENCE NONE
FRONT B;;;;FRONT
PRIORITY;;;;;---
ZONE2 SET
Not Available
Notes