Yamaha RX-V861 Stereo Receiver User Manual


 
RESETTING THE SYSTEM
104 En
Use this feature to reset all the parameters of this unit to the initial factory settings.
This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. However, the advanced setup
menu parameters will not be initialized.
The initial factory settings are activated next time you turn on this unit.
y
To cancel the initialization procedure at any time without making any changes, press
B
MASTER ON/OFF on the front panel to
release it outward to the OFF position.
1 Press
B
MASTER ON/OFF on the front
panel to release it outward to the OFF
position to turn off this unit.
2 Press and hold
C
TONE CONTROL and
then press
B
MASTER ON/OFF inward to
the ON position to turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3 Rotate the
D
PROGRAM selector to select
“PRESET”.
4 Press
C
TONE CONTROL repeatedly to
select “RESET”.
y
Select “CANCEL” to cancel the initialization procedure
without making any changes.
5 Press
B
MASTER ON/OFF to release it
outward to the OFF position to confirm your
selection and turn off this unit.
Resetting the system
Notes
TONE CONTROL
MASTER
ON
OFF
While holding
down