36 En
Selecting the SCENE templates
You can create your original SCENE templates for each
SCENE button. You can refer to the preset 18 SCENE
templates to create the original SCENE templates.
1 Turn on the video monitor connected to this
unit.
2 Set the operation mode selector to
K
AMP
and then press and hold the desired
F
SCENE button for 3 seconds.
The SCENE template customizing screen appears on
the video monitor.
When the SCENE template you want to customize is not
assigned to any of the
F
SCENE buttons, press
D
l / h
repeatedly to recall the desired SCENE template on the
menu screen.
3 Press
D
k / n to select the desired parameter
of the SCENE template and then
D
l / h to
select the desired value of the selected
parameter.
You can adjust the following parameters for a SCENE
template:
• INPUT: The input source component.
• MODE: The active sound field programs,
STRAIGHT or Pure Direct mode.
• NIGHT: The night listening mode (see page 49).
− SYSTEM: Keeps the current night listening
mode.
− CINEMA: Sets the night listening mode to the
CINEMA mode.
− MUSIC: Sets the night listening mode to the
MUSIC mode.
4 Press the
F
SCENE button again to confirm
the edit.
y
An asterisk mark (*) appears by the name of the original SCENE
template.
• Once the desired SCENE templates are assigned to the
corresponding
F
SCENE buttons, you need to set the input
source of the SCENE template on the remote control. See
page 85 for details.
• You can create a customized SCENE template for each SCENE
button, and if you create another customized SCENE template,
this unit overwrites the old customized SCENE template with
the new one.
• The newly created template is only available for the assigned
SCENE button.
■ Rename the SCENE templates
Select the name of the SCENE template at step 3
of “Creating your original SCENE templates” and
then press
D
ENTER.
•Press
D
k / n to select the desired character.
•Press
D
l / h to place an “_” (underscore) under the
space or the desired character.
•Press
E
RETURN to cancel the new name.
•Press
D
ENTER to confirm the new name.
Creating your original SCENE
templates
Note
: DVD Playing
: DVD
: CINEMA
SCENE
INPUT
NIGHT
SCENE : DVD Playing
1
SCENE template library
(Image)
Select the desired SCENE
template
Assign the SCENE
template to the
SCENE button
Create an original SCENE
template
[RETURN]:STATUS
[SCENE1]:SET
[ENTER]:Rename
NIGHT:SYSTEM
MODE:STRAIGHT
INPUT: DVD
.pDVDViewing[
SCENE1
[
Notes