Yamaha HTR-6060 Stereo Receiver User Manual


 
36 En
Selecting the SCENE templates
You can create your original SCENE templates for each
SCENE button. You can refer to the preset 18 SCENE
templates to create the original SCENE templates.
1 Turn on the video monitor connected to this
unit.
2 Set the operation mode selector to
K
AMP
and then press and hold the desired
F
SCENE button for 3 seconds.
The SCENE template customizing screen appears on
the video monitor.
When the SCENE template you want to customize is not
assigned to any of the
F
SCENE buttons, press
D
l / h
repeatedly to recall the desired SCENE template on the
menu screen.
3 Press
D
k / n to select the desired parameter
of the SCENE template and then l / h to
select the desired value of the selected
parameter.
You can adjust the following parameters for a SCENE
template:
INPUT: The input source component.
MODE: The active sound field programs,
STRAIGHT or Pure Direct mode.
NIGHT: The night listening mode (see page 49).
SYSTEM: Keeps the current night listening
mode.
CINEMA: Sets the night listening mode to the
CINEMA mode.
MUSIC: Sets the night listening mode to the
MUSIC mode.
4 Press the
F
SCENE button again to confirm
the edit.
y
An asterisk mark (*) appears by the name of the original SCENE
template.
Once the desired SCENE templates are assigned to the
corresponding
F
SCENE buttons, you need to set the input
source of the SCENE template on the remote control. See
page 84 for details.
You can create a customized SCENE template for each SCENE
button, and if you create another customized SCENE template,
this unit overwrites the old customized SCENE template with
the new one.
The newly created template is only available for the assigned
SCENE button.
Rename the SCENE templates
Select the name of the SCENE template at step 3
of “Creating your original SCENE templates” and
then press
D
ENTER.
•Press
D
k / n to select the desired character.
•Press
D
l / h to place an “_” (underscore) under the
space or the desired character.
•Press
E
RETURN to cancel the new name.
•Press
D
ENTER to confirm the new name.
Creating your original SCENE
templates
Note
1
SCENE template library
(Image)
Select the desired SCENE
template
Assign the SCENE
template to the
SCENE button
Create an original SCENE
template

[RETURN]:STATUS
[SCENE1]:SET
[ENTER]:Rename
NIGHT:SYSTEM

MODE:STRAIGHT
INPUT: DVD
.pDVDViewing[

SCENE1
[
Notes