Filter
Top Products
RUNNING H/F 1
8
To enjoy the tuner on this unit, you need to connect AM, FM and DAB antennas to this unit. This product includes an
AM loop antenna, Indoor FM antenna and Indoor DAB antenna. If there is a problem of weak radio wave reception in
your area or you want to improve radio reception, we recommend that you use commercially available outdoor antennas.
For details, consult the nearest authorized YAMAHA dealer or service center.
The AM loop Antenna should be placed away from this unit.
1 Attach the antenna stand to the AM loop
antenna.
When attaching the antenna to the wall, you do not
need to use the antenna stand.
2 Press and hold the tab.
3 Insert the AM loop antenna lead wires into
the AM ANT terminal. Then release the tab.
4 Repeat steps 2 to 3 to insert the AM loop
antenna lead wires into the GND terminal.
5 Extend the cord and place the AM loop
antenna away from this unit and speaker
cables.
While listening to the radio, rotate the antenna head
to find the best angle for reception.
1 Connect the supplied indoor FM antenna to
the FM ANT jack on this unit.
2 Place the antenna away from this unit and
speaker cables.
It is recommended to use an outdoor FM Antenna in weak
FM signal areas. In this case, d
isconnect the indoor FM
antenna.
CONNECTING ANTENNAS
Note
AM loop Antenna
OUTIN
OUT
IN
AM ANTGND
DAB ANT
OPTICAL
OUT
SUBWOOFER
TAPE
AUX 1
TUNER
DIGITAL
OUT
IN
AUX 2
Indoor FM
antenna
(supplied)
AM loop
antenna
(supplied)
Ground
(GND terminal)
Indoor FM Antenna
00EN_00_CRX-M170_G.book Page 8 Wednesday, July 27, 2005 6:11 PM