Filter
Top Products
HOW TO USE THE BUILT-IN TIMER
E-33
Sleep timer operation
This unit can be turned off automatically.
1 Play the desired sound source.
2 Press the SLEEP button repeatedly until the desired sleep
time appears in the display. The display will change as
described below. (Time is displayed by the minute.)
* The original display mode will resume about 5 seconds
after the selection is made.
* If the current time is selected, the power is turned off
after 2 seconds.
3 The unit will turn off automatically after the preset sleep
time.
To confirm the sleep time setting
Press the SLEEP button once. The remaining time of the
preset sleep time appears in the display.
To change the sleep time
While the “SLEEP” indicator is on, press the SLEEP button
repeatedly until the desired time to replace appears. The
display will change as described below.
* If the current time is selected, the power is turned off
after 2 seconds.
To stop the sleep timer operation
Press the POWER switch.
(The “SLEEP” indicator will go out.)
Using the timer and the sleep
timer at the same time
1 Prepare timer playback. (See page 31.)
2 Press the SLEEP button and set the sleep time.
* When the sleep timer operation finishes, the timer will
function to turn the source on at the preset time.
Notes
* The source set in the sleep timer operation will be turned
on at the time set in the timer playback operation.
* Do not set the timer time so that the timer will start during
sleep timer operation. (Since sleep timer operation has
priority, the timer will not operate.)
Current Time
60 45 30 15
↑
↑
↑
↑
↑
Remaining time of
the preset sleep time
Current time
15 30 45
60
↑
↑
↑
↑
↑
↑
SLEEP
POWER