Filter
Top Products
12
34
5
6
7
8
9
0
CLEAR
CALL
+
TIME
PROG
REPEAT
CD
BAND
TUNER
HALL
JAZZ CLUB
ROCK CNCT
OFF
POWER
AUX
DAT
VOLUME
TAPE
-
b
a
10
+
E-30
Recording from the built-in tuner
1 Tune to the desired station. (Refer to the “TUNER
OPERATION” on page 19.)
2 Load a tape into the tape “b” cassette compartment.
3 When recording with the Dolby NR system, set the
DOLBY NR switch to B or C; if not, set it to OFF.
* For selection of the Dolby B or C position, refer to the
“Dolby B and C Type Noise Reduction” on page 24.
4 Set the REVERSE MODE switch to to record on only
one side, or to for continuous recording on both sides.
5 Press the REC button.
* The indicator beside the REC button lights up and the
play indicators flash.
6 Press the play button to record side A, or the play
button to record side B.
* For continuous recording of both sides, begin on side
A. Recording stops automatically at the end of side B.
To stop recording temporarily
11 Press the PAUSE button.
22 To resume recording, press the play button whose
indicator is flashing.
To stop recording
Press the stop button.
Erasing recorded tapes
1 Load the tape to be erased into the tape “b” cassette
compartment.
2 Select the AUX position with the INPUT selector.
3 Set the REVERSE MODE switch to to erase only one
side and to to erase both sides.
4 Press the REC button, then press the play button to
erase side A of tape, or the play button to erase side B.
RECORDING
43 11 56
2
5,11
6,22