Filter
Top Products
TUNER OPERATION
E-20
Manual memory
When auto scan memory does not function due to a weak
signal, frequencies are deviated due to a strong signal, or
you want to change the memory contents, perform the
following operation.
1 Perform steps 1 – 2 of the “Auto scan memory” section.
2 Use the TUNING ( or ) button to tune into the
desired station.
Auto tuning
When the TUNING ( or ) button is pressed for more
than 0.5 second and then released, the tuning stops at the
first receivable broadcast station.
Manual tuning
Press the TUNING ( or ) button repeatedly to adjust
the frequency display to the frequency of the desired
station.
3 Press the MEMORY button, so that the display’s
“MEMORY” indicator flashes.
4 Press the TUNER PRESET ( or ) button until the
preset number to be programmed appears in the display.
5 Press the MEMORY button to store that station in the
selected station preset number memory.
* 20 FM stations can be preset (preset channels 1
through 20).
* 10 AM (LW or MW) stations can be preset (preset
channels 1 through 10).
(There are no presets 11 through 20 for AM (LW or
MW) stations.)
6 Repeat steps 1 – 5 to set the other preset stations, or to
change a preset station.
3,5
4
2