Yamaha AVENTAGE RX-A3020 Stereo Receiver User Manual


 
CONFIGURATIONS Controlling external devices with the remote control En 139
4
Press ENTER.
5
Aim the infrared transmitters of the remote controls
at each other.
6
Perform the following steps (a and b) within
10 seconds.
a On the unit, press one of the following keys to which you want to
assign a function.
For playback device: SOURCE z, menu operations keys,
DISPLAY, MODE, external device operation keys, numeric keys
For TV: TV operation keys
b On the external device, press the key from which the operation is
learned until “OK” appears in the display window.
If “NG” appears, learning has failed. Repeat from Step 4.
7
Repeat Steps 3 to 6 until all desired operations are
learned.
8
To exit from the setup menu, press SETUP.
This remote control can learn approximately 200 functions (may be
decreased depending on the signals). If “FULL” appears in the display
window, clear unnecessary assignments to free some memory space for the
new functions.
Editing device names
You can edit the device names or scene names displayed on the
remote control’s display window.
1
Press SETUP.
Perform each of the following steps within 30 seconds.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
2
Use the cursor keys (q/w) to select “RENAME” and
press ENTER.
3
Press one of the following keys to select a device or
a scene.
For playback device: press the input selection key
(corresponding to the input jacks where the device is connected).
For TV: press TV z.
For AV receiver (the unit): press RECEIVER z.
For scene: press one of the SCENE keys.
SOURCE
RECEIVER
AV
AUDIO
1 2 3 4
5 6 7
V-AU X
1 2 3 4
MULTI
PHONO
USB NET
TUNER
[ C ][ A ] [ B ]
SCENE
1 2 3 4
PROGRAM
VOLUME
MUTE
Remote control of external device
5 to 10 cm (2 to 4”) apart
Note
If you press RECEIVER z in Step 3, you can assign functions of an external
receiver to the menu operation keys, external device operation keys or
numeric keys. However, it makes these keys to control the unit impossible. If
you need to restore the remote control code for the unit, perform the following
steps.
a Press SETUP.
b Use the cursor keys (q/w) to select “CLEAR” and press ENTER.
c Use the cursor keys (q/w) to select “LEARN” and press ENTER.
d Press RECEIVER z.
e Hold down ENTER until “OK” appears on the window display.
f To exit from the setup menu, press SETUP.
RENAME
2 3
5
1
4 6
TUN./ CH
ENHANCER
SUR.
DECODE
HDMI OUT
MEMO
RY
INFO AM
PAR T
Y
FM
0
10
LEVELENT
SETUPZONE
87
SLEEP
9
SOURCE
RECEIVER
AV
AUDIO
1 2 3 4
5 6 7
V-A UX
1 2 3 4
MULTI
PHONO
USB NET
TUNER
[ C ][ A ] [ B ]
CLASSICAL
LIVE
CLUB
ENTERTAIN
MOVIE
STEREO STRAIGHT
INPUT
PURE
DIRECT
MUTE
TV
SCENE
1 2 3 4
PROGRAM
VOLUME
TV VOL
MUTE
MODE
TOP MENU
RETURN DISPLAY
POP-UP/MENU
TV CH
PRESET
ENTER
ON SCREEN
OPTION
T
UN.
/
CH
SOU
R
CE
RECEIVE
R
SETUP
TV z
MODEMODE
DISPLAYDISPLAY
ENTER
SCENE
RECEIVER z RECEIVER z
Input selection keys
Menu operation keys
Cursor keys
TV operation keys
Numeric keys
External device
operation keys
External device
operation keys