Filter
Top Products
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 126
❑ Mono
Switches between stereo and monaural for Zone2 or Zone3 output.
Settings
❑ Zone Scene Rename
Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV
screen.
■ Procedure
1
Use the cursor keys to select a scene to be renamed and press ENTER.
2
Press ENTER to enter the name edit screen.
3
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
• To clear the entry, select “CLEAR”.
4
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
5
To exit from the menu, press ON SCREEN.
❑ Zone Rename
Changes the zone name (for Zone2 or Zone3) displayed on the front display or TV
screen.
You can change the zone name in the same manner as “Zone Rename” in “Main Zone
Set” (p.125).
■ Zone4 Set
(RX-A3020 only)
Configures the Zone4 settings.
❑ Zone Scene Rename
Changes the scene names (for Zone4) displayed on the front display or TV screen.
You can change the scene names in the same manner as “Zone Scene Rename” in
“Zone2 Set, Zone3 Set” (p.126).
❑ Zone Rename
Changes the zone name (for Zone4) displayed on the front display or TV screen.
You can change the zone name in the same manner as “Zone Rename” in “Main Zone
Set” (p.125).
■ Monitor Out Assign
Select the zone for which the MONITOR OUT/ZONE OUT (COMPONENT VIDEO,
S VIDEO and VIDEO) jacks are used.
Settings
Main (default), Zone2, Zone3
• To watch videos played back on a video device on the zone video monitor, you need to connect the video
monitor to the unit in the same way as the video device. For example, if you want to watch videos input from
the DVD player via a component video cable, connect the video monitor to the COMPONENT VIDEO jacks
with a component video cable.
Off (default) Produces stereo sounds in Zone2 or Zone3.
On Produces monaural sounds in Zone2 or Zone3.