Filter
Top Products
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 112
Setup menu items
Menu Item Function Page
Speaker
Auto Setup Automatically optimizes the speaker settings (YPAO). 50
Manual Setup
Setting Pattern Registers two speaker setting patterns and switches between them. 114
Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 114
Power Amp Assign Selects a speaker system. 114
Configuration
Front Selects the size of the front speakers. 115
Center Selects whether or not a center speaker is connected and its size. 115
Surround Selects whether or not surround speakers are connected and their size. 115
Surround Back Selects whether or not surround back speakers are connected and their size. 115
Front Presence Selects whether or not front presence speakers are connected. 116
Rear Presence Selects whether or not rear presence speakers are connected. 116
Subwoofer 1
Subwoofer 2
Selects whether or not a subwoofer is connected to the SUBWOOFER 1 or SUBWOOFER 2 jack and its phase. 116
SWFR Layout Selects a subwoofer layout when 2 subwoofers are used. 116
Extra Bass Sets the speakers to produce the front channel low-frequency components. 116
Distance Sets the distance between each speaker and listening position. 116
Level Adjusts the volume of each speaker. 117
Parametric EQ Adjusts the tone with an equalizer. 117
Test Tone Enables/disables the test tone output. 117
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 118
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 118
Adjustment Adjusts the delay between video and audio output manually. 118
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 118
Max Volume Sets the maximum volume to prevent excessive loudness. 118
Initial Volume Sets the initial volume for when this receiver is turned on. 119
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 119
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level. 119
Video
Analog to Analog Conversion Enables/disables the video conversion between the analog video jacks 119
Video Mode Enables/disables the video signal processing (resolution, aspect ratio and video adjustments). 119