Filter
Top Products
E14
CD OR CD+G OPERATION
7. Select DISC 2 by pressing the DISC 2 button.
8. Select track 9 by pressing the SKIP button.
9. Press the PROGRAM button.
10. Select DISC 3 by pressing the DISC 3 button.
11. Select “AL” (all) by pressing the SKIP button. Until you reach the end of the tracks.
12. Press the PROGRAM button.
13. Press the PLAY/PAUSE button to start play.
When all programmed selections have been played, the first programmed track on DISC 1 will
appear and “MEMORY” will blink.
! The program contents are retained in memory.
! The maximum number of selections that can be programmed is 60. If you try to enter more
selections, “FULL” blinks on the display.
! The program is cleared when the STOP button is pressed in the stop mode.
CHECKING THE PROGRAM
Each time the PROGRAM button is pressed in the stop mode, the programmed details
sequentially appear on the display.
CHANGING A PROGRAM
To add a new selection to a program:
1. In the stop mode, press the PROGRAM button repeatedly until “00” on the track section
appears on the display.
2. Select a disc and track number as explained above.
3. Press the PROGRAM button.
To change a selection:
1. In the stop mode, press the PROGRAM button repeated until the selection to be replaced is
displayed.
2. Select a disc and track number as explained above.
3. Press the PROGRAM button.
Note: Programmed tracks cannot be deleted individually.
2
1
3
TR
MEMORY
2
1
3
TR
MEMORY
2
1
3
TR
MEMORY
MEMORY
2
1
3
TR
MEMORY
2
1
3
TR
2
1
3
TR
MEMORY
/
ENGLISH