Filter
Top Products
E13
TIME DISPLAY SELECTION
Press the DISPLAY button repeatedly during normal play. The display changes in the following
sequence:
REMAIN (Remaining playing time for the current track)
REMAIN TOTAL (Total remaining playing time for the disc)
TOTAL (Elapsed playing time for the disc)
Notes:
! During programmed play “REMAIN TOTAL” and “TOTAL” cannot be displayed.
! The displayed playing times may differ slightly from the times listed on the notes
accompanying the disc.
PROGRAMMED PLAY
Up to 60 selections, from up to 3 discs, can be programmed for play in any order.
! To begin the programming procedure, select the “CD” function first.
! The discs or tracks must be programmed in the stop mode.
! The same disc or track can be programmed more than once.
! Load the disc that you want to programmed before starting programmed play.
Programming procedure
Follow the example below to program tracks 2 and 6 on DISC 1, track 9 on DISC 2 and all tracks
on DISC 3. In this example, each disc has 9 tracks and DISC 3 is in playing position.
1. Press the PROGRAM button.
2. Select DISC 1 by pressing the DISC 1 button.
! The DISC SKIP button on the remote control can also be used.
3. Select track 2 by pressing the SKIP button.
! The number button on the remote control can also be used.
4. Press the PROGRAM button.
5. Select track 6 by pressing the SKIP button.
6. Press the PROGRAM button.
CD OR CD+G OPERATION
2
1
3
TR
MEMORY
2
3
TR
MEMORY
1
2
1
3
TR
MEMORY
2
1
3
TR
MEMORY
2
1
3
TR
MEMORY
2
1
3
TR
MEMORY
ENGLISH