Filter
Top Products
Removal and Replacement
6–28
WFM 90 and WFM 91 Service Manual
To replace the battery orientation marker and/or the battery cushion pad, perform
the following procedure:
1. To replace the battery cushion pad and the battery orientation marker, peel
off the protective covering of the adhesive surface of the battery cushion pad.
2. Position the battery cushion pad in place above the bottom cover before you
press it onto the bottom cover. See Figure 6–13.
3. Rub your fingers over the battery cushion pad once it is positioned on the
bottom cover to make sure the pad is securely in place.
Battery orientation
marker
Battery cushion
pad
Line up holes to aid
positioning
Figure 6–13: Battery orientation marker position