Filter
Top Products
Switch on the receiver using the mains power switch (on the appliance). The following menu appears
on the TV screen:
To go to the System Menu switch the receiver into stand-by mode using the remote control unit ( )
. Now
hold down the buttons on the front of the receiver simultaneously for a few seconds. The
System Menu will appear on the screen on a blue background. An arrow appears next to Basic Pro-
gramming. By pressing the buttons on the remote control, this arrow can be moved up and
down.
ATTENTION: If you press the CNCL button when the System Menu is on the screen the receiver is
in the normal operation mode (see chapter 7). To recall the System Menu follow the procedure outli-
ned above.
TechniSat ST 6002 S
12