Teac W-865R Stereo System User Manual


 
12
Playback (either TAPE I or TAPE II) 2
EA A F
B D DB
C
C
To stop playback
Press the stop button (H).
To stop playback temporarily
Press the PAUSE button.
To resume playback, press the PAUSE button again, or press
the play button (h
or y).
< While playback is paused, pressing the play button whose
direction is opposite to the indicator (h
or y) on the display,
will switch the playback direction. This does not release the
pause function. Press PAUSE or the same play button (h
or
y
) again to start playback on the other side of the tape.
Fast forward/Rewind
Press the m or , button while in stop mode to fast wind
the tape.
To stop the fast winding tape, press the stop button (H).
C
B
A
Tape counter
Press the CLEAR I or II button to reset the tape counter to
0000. You can use this function for easy relocation of any
desired point on the tape.
Pitch control (TAPE I deck only)
This control varies the pitch of the music during playback.
(This control does not work during recording or dubbing.)
Turning the pitch control knob clockwise increases the
playback speed and raises the pitch up to +10%.
Turning the pitch control knob counterclockwise reduces the
playback speed and lowers the pitch by a maximum of –10%.
To listen through headphones
Plug your headphones into the PHONES jack, and put on the
headphones.
Plugging into the PHONES jack does not disable the line
outputs.
CAUTION
There is no level control for the headphones output. Beware
that sudden loud sounds may occur depending on recorded
material. You should avoid prolonged exposure to high
volume sound as this can damage your hearing.
F
E
SYNC REV BLANK SCAN
PARALLEL
HIGH DUB
NORM DUB
REC
PLAY
REC
PLAY
D