Teac NP-H750 Stereo Amplifier User Manual


 
1515
ENGLISH
E
STANDBY/ON button
Press this button to turn the unit on or put it in standby
mode.
The color of the indicator above the STANDBY/ON
button shows the status of the unit.
Indicator Status
Orange Standby
Blue ON
F
PHONES jack
To listen with headphones, first minimize the volume.
Then, insert the headphones’ plug into the PHONES
jack and gradually increase the volume.
No sound will be output from the speakers while the
headphones’ plug is inserted in the PHONES jack.
V
CAUTION
Do not connect or disconnect headphones or
turn the unit on or put it in standby while wear-
ing them.
Sudden loud noises could occur, which might
cause hearing damage.
G
AUX 2 IN jack
Connect this jack to the headphones’ jack (or an audio
output jack) of a portable audio player or other device
using a commercially available 3.5 mm stereo mini plug
cable.
H
USB port
Connect an iPod/iPhone/iPad or USB flash drive.
I
SOURCE button
Use this button to select the source.
J
MENU button
In USB/iPod mode, use this button to go back to the
previous menu when an iPod/iPhone/iPad is connected.
When in network mode (Internet radio/media player),
the setup menu appears.
K
Skip buttons [.//]
In USB/iPod mode, use these buttons to skip to the pre-
vious or next track or file when playing back or paused.
Use these buttons to adjust the balance.
When a menu is shown, use / to select in the same
way as the ENTER button.
When a folder is shown, press . to move up one
folder level.
L
ENTER button
In USB/iPod mode, use this button to confirm selections
in menus when an iPod/iPhone/iPad is connected.
When making settings, use this button to confirm
selection of a menu item.
In network mode (Internet radio/media player), use to
select a station or track.