Filter
Top Products
8 - Specifications
TASCAM MD-801R/P Mk II
8–3
8.2.2Analog I/O
8.2.3Digital I/O
8.2.4Other connections
8.2.5General and electrical
Error correction ACIRC (Advanced Cross Interleave
Reed-Solomon Code)
Frequency response 20 Hz – 20 kHz ±0.5 dB
Signal-to-noise ratio
(playback)
>101 dB (1 kHz/weighted A)
Signal-to-noise ratio
(recording)
> 94 dB (1 kHz/weighted A)
THD < 0.006%
Wow and flutter Unmeasurable
Pitch control ±9.9% (in 0.1% steps)
Playback rise time
(from play ready
mode)
< 0.1s
Balanced outputs
(
LINE
)
XLR-3-32 type, nominal +4 dBu, full-
scale –16 dB
Maximum output level: +24 dBu
Nominal impedance: 11
Ω
Trimmer potentiometer allows 11 dB
adjustment (–7 dB cut to +4 dB boost)
Unbalanced outputs
(
MONITOR
)
RCA pin jacks, nominal –10 dBV ±1 dB,
full-scale –16 dB
Maximum output level: +6 dBV
Nominal impedance: 220
Ω
Headphones
(
PHONES
)
1/4” stereo jack
Maximum output level: 50 mW + 50 mW
Impedance: 32
Ω
Balanced inputs XLR-3-31 type, nominal +4 dBu, full-
scale –16 dB
Maximum input level: +24 dBu
Nominal impedance: 2.2 k
Ω
Trimmer potentiometer allows 11 dB
adjustment (–4 dB cut to +7 dB boost)
Unbalanced inputs RCA pin jacks, nominal –10 dBV, full-
scale –16 dB
Maximum input level: +6 dBV
Nominal impedance: 8 k
Ω
AES/EBU
output
XLR-3-32 type, AES3-1992 format
R
R
R
COAXIAL
output
RCA pin jack, IEC60958 (consumer)
format (SPDIF)
AES/EBU
input
XLR-3-31 type, AES3-1992 format.
Valid sampling frequencies from
<32 kHz to 48 kHz
COAXIAL
input
RCA pin jack, IEC60958 (consumer)
format (SPDIF). Valid sampling frequen-
cies from <32 kHz to 48 kHz
WORD SYNC
IN
BNC connector, impedance 75
Ω
, sam-
pling frequency 44.1 kHz, ±6%
WORD SYNC
THRU
BNC connector, auto-terminating, dupli-
cates signal received at
WORD
SYNC IN
REMOTE
CONTROL
’D’-sub 25-pin, connects to TASCAM
optional RC-801 remote control unit or
to optional RC-FS10/20 remote
controller
REMOTE
(PARALLEL)
’D’-sub 37-pin, TTL level, connects to
TASCAM RC-8 remote control unit
REMOTE
(SERIAL)
’D’-sub 9-pin, RS-232C
KEYBOARD
PS/2-compatible, mini-DIN 6-pin
Voltage USA/Canada 120 VAC @ 60 Hz
U.K./Europe 230 VAC @ 50 Hz
Australia 240 VAC @ 50 Hz
Power consumption 33 W (MD-801R Mk II)
29 W (MD-801P Mk II)
Dimensions
(w x h x d)
482 x 132 x 353 (mm)
19 x 5.2 x 13.9 (in)
Weight 8 kg (17.6 lbs)
Optional accessories RC-801 full function remote control unit
RC-8 simple remote control unit
PW-1XMD cable for title copying
BU-801 RAM buffer for flash start
RC-FS10/20 flash start control unit
R
R