Filter
Top Products
7 – Reference and specifications—Dimensional drawing
TASCAM CC-222MKII Owner’s Manual 39
General specifications
Dimensional drawing
Tape maintenance
The heads and tape path should be cleaned and
demagnetized periodically.
Cleaning the tape path Apply head cleaning
fluid to a cotton bud or soft cloth, and lightly rub the
heads, capstan and all metal parts in the tape path.
Also clean the pinch roller using rubber cleaning
fluid.
Both fluids are available in TEAC Tape Cleaning
Kits HC-2 and RC-2 in the U.S.A. or TZ-261 in other
areas.
Demagnetizing heads Be sure that the power is
off, then demagnetize the heads using a TEAC E-3
demagnetizer.
For details of its use, read the instructions supplied
with the demagnetizer and make sure you understand
them thoroughly before attempting this operation.
Voltage requirements USA/Canada 120 VAC, 60 Hz
U.K./Europe 230 VAC, 50 Hz
Australia 240 VAC, 50 Hz
General export 120/230 VAC, 60 Hz
Power consumption 28 W
Applicable electromagnetic environment E4
Peak inrush current 1.1 A
Dimensions 483 x 138 x 295 (mm)
19 x 5.4 x 11.6 (in)
Weight 7.4 kg (16.3 lbs)
Operating temperature 5°C to 35°C (41°F to 95°F)
Supplied accessories RC-222 remote control unit
2 x AA batteries
Rack mounting kit
466 m (18.4")
483 mm (19.0")
435mm (17.1")
57.2 mm
(2.25")
132.5 mm (5.2")
138 mm (5.4")
270 mm (10.6")
15 mm
(0.6")
10 mm
(0.4")
Pinch Roller
Capstan
Erase Head
Record/Play Head