Tascam CC-222MKII Cassette Player User Manual


 
2 – Features and controls—Rear panel features
TASCAM CC-222MKII Owner’s Manual 13
M OPEN/CLOSE key Opens and closes the
disc tray.
N DISPLAY key Changes the time display for
the disc recording and playback.
O FINALIZE key Used when finalizing record-
able discs.
P ERASE key Used when erasing data from
CD-RW discs.
Q SYNC REC key Turns synchronized record-
ing of the disc recorder on and off.
R MENU key Repeated presses of this key cycle
through the different menu options.
S MULTI DIAL Used to select and confirm
menu settings etc. (turn to make the setting, push to
confirm), and also as a track search facility when
playing back discs.
T Disc tray Open and close this tray with the
OPENCLOSE key M to load and unload discs.
U REMOTE SENSOR window Receives the
infra-red signals from the remote control unit. Do not
block this window if you are using the remote control
unit.
V PITCH CONTROL knob This is a center-
detented knob which allows the tape speed (and
therefore the pitch) to be changed by ±12%.
W REV MODE switch This three-position
switch allows the choice of single-side or bidirec-
tional playback and recording (Ä or Ê), or (ä)
continuous playback only (not recording).
X Dolby NR (OFF/ON) switch Use this
switch to turn the Dolby noise reduction off and on
for the cassette deck.
Y CD-TAPE CONT PLAY switch Use this
to turn continuous playback (alternating between
disc and cassette) on and off.
Z CD TIMER (OFF/PLAY) switch Use this
switch to turn the CD timer option on or off (when
this is in the
PLAY position, turning on the machine
with a disc inserted will automatically start play-
back).
a CD STOP key Stops CD playback or disc
recording,
b CD PLAY key Starts CD playback or record-
ing (from record ready mode).
c CD PAUSE key Pauses or unpauses CD
playback or recording (starts recording from record
pause mode).
d CD RECORD key places the disc in record
ready mode and performs manual track incrementing
while recording.
e MONITOR (TAPE/MIX/DISC) switch
This switch selects the source for the headphone out-
puts as either the cassette deck (
TAPE), the disc
recorder (
DISC), or a mixture of both (MIX).
f PHONES jack and volume control
Connect a standard pair of stereo headphones to this
1/4” jack, and adjust the level with the control.
Rear panel features
The CC-222MKII line analog inputs and outputs all
operate at the –10 dBV level. For details of input and
output impedances, etc., consult the specifications.
@# $
%
^