Filter
Top Products
4 – CD player—Auto spacing
24 TASCAM CC-222MKII Owner’s Manual
Auto spacing
This function inserts a gap of about four seconds
between tracks on playback. This can be useful when
recording to tape, so that automatic searching can
take place more easily on tapes recorded from disc
(see “Search keys” on page 20).
NOTE
This function is only available from the remote control
unit. It is not possible to use this function with the main
unit only.
If you press the AUTO SPACE key while the play-
back is automatically paused between tracks as a
result of the auto space function being enabled, the
unit remains in pause mode, and playback will not
restart after the auto pause time is elapsed.
If you press the
AUTO SPACE key while playback is
taking place, and the auto space function is enabled,
the auto space function is then cancelled.
You should note that track access in modes other than
the “continue” mode, and for discs which are dirty or
scratched, may take some time, and the gap between
tracks on playback will therefore exceed four
seconds.
Timer playback
By using an external timer, you can set the CD player
to play the loaded disc automatically when the unit is
turned on at a pre-determined time.
Consult the timer’s documentation for details of how
to set it, and for connection of its power outlet to the
CC-222MKII.
Make sure that the
CD TIMER switch of the CC-
222MKII is set to
PLAY.
When the timer turns on the CC-222MKII, the disc
TOC is read and then playback starts.