Filter
Top Products
2 • Front and rear panels—Main unit (front panel)
12
TASCAM CD-302
2.1 Main unit (front panel)
Since you perform almost all control functions of the
CD-302 from the remote control unit, the front panel
only contains the following features:
1
POWER switch and indicator
Turns the power on and off. The indicator lights
when power is supplied.
When Direct Mode (see 4.20, “Direct mode”) is on,
the drive starts playing when power is supplied.
2
OPEN keys (1 and 2)
Open and close the appropriate disc tray.
NOTE
These keys cannot be used when the Direct mode
(see 4.20, “Direct mode”) is off and a disc is being
played back.
3 Disc trays
Insert Compact Discs into these trays, label side
upwards.
2.2 Main unit (rear panel)
4 OUTPUT jacks
RCA connectors providing line level output signals.
5 REMOTE connectors
Use these connectors to connect the remote control
units.
6 FADER START/STOP, EVENT START
jacks
The decks can be controlled using external Fader
Start and Event Start commands through these jacks.
Connect appropriately-wired tip-ring-sleeve plugs to
these jacks.
See 4.23, “Fader and Event Start/Stop” for details of
how to wire the plugs, and how to use these
connectors.
2.3 Remote control unit (front
panel)
7 OPEN key
Opens and closes the disc tray.
NOTE
This key cannot be used when the Direct mode (see
4.20, “Direct mode”) is off and a disc is being played
back.
8 TIME key
Selects the time display type:
ELAPSED
,
REMAIN
or
A-B loop duration (in A-B loop play mode).
9 SINGLE key
Selects the play mode, either continuous play (all
tracks), SINGLE (1 track) play, PROGRAM play.
A INDEX key
Changes to the
INDEX
search mode. By pressing the
INDEX key, you can search by index using the SKIP
keys.
When the index search mode is active, the
INDEX
indicator lights in the display.
B SKIP keys
Use these to perform track searches (or index
searches when the
INDEX
mode is active).
If the
SKIP keys are pressed and held for more than
half a second, the index number will increment or
decrement appropriately. The player will go to the
selected index number when the key is released.
The
>>| key advances playback to the start of the
next track. The
|<< key sets playback to the start of
the current track, or if pushed again to the start of the
previous track.
If you press the keys many times, the deck will locate
to the start of the track which depends on the number
of times the keys were pressed.
NOTE
If you do track or index searching when the disc is being
played, playback will restart after location to the track or
index.
If the track or index search is performed in pause
mode, the unit will enter pause mode after location to
the track or index.
C SEARCH keys
Use these keys to locate to the desired position.
If you press these keys when the disc is being played
back, playback will restart when the desired position
is reached.
If you search in pause mode, the unit will enter pause
mode when the desired point is reached