Filter
Top Products
User's Manual
58
APPENDIX
Specifi cations
Manufactured under license from
Digital Theater Systems, Inc.
US Pat. No. 5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-
wide patents issued and pending.
“DTS”, “DTS-ES Extended Surround”
and “Neo:6” are trademarks of Digital
Theater Systems, Inc. Copyright 1996,
2000 Digital Theater Systems, Inc. All
Rights Reserved.
Manufactured under license from
Dolby Laboratories. “Dolby”, “Pro
Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
FireWire is a trademark of Apple Com-
puter Inc.
© 2003 Sunfi re Corporation.
All rights reserved. Sunfi re Corpora-
tion re serves the right to improve
its products at any time. Therefore,
specifi cations are subject to change
without notice.
Manual part number:
913-010-00 Rev C
Rear Panel View
Line Level Inputs
Sensitivity
(for 0.5 V output): 125 mV
Phono: 1.6 mV
Frequency response:
20 Hz-20 kHz +/- 0.5 dB
Signal to Noise
(relative to 2V out):
Analog 97 dB
Digital 105 dB
Distortion (THD): < 0.03%
Separation (at 1 kHz): 70 dB
Tone Control:
Bass: +/- 10 dB
Tre ble: +/- 10 dB
Audio Outputs
Frequency Response:
All but subwoofer:
(Large): 20 Hz-20 kHz
Sub : 20-160 Hz
(crossover set to 160 Hz)
(The Sub plays the bass from the
other channels using Bass Man-
age ment)
Delay adjustment
Center: 0-20 feet
Rear: 0-20 feet
(The TGIII calculates the delay
time from the distance measure-
ment of the speaker to the listening
position)
Video Section
Video inputs/outputs: 1 Vp-p
75 ohms
Bandwidth
Com po nent: 100 MHz, -1.5 dB
Com pos ite: 6 MHz, -2 dB
S-video: 18 MHz, -1.5 dB
FM Tuner Section
FM range: 87.5-108 MHz
0.2 MHz steps
(0.05 MHz for some
export models)
Usable sensitivity (Mono):
1.6 uV (75 ohms)
15.2 dBf (75 kHz
DEV, 30 dB)
50dB quieting sensitivity (Stereo):
31.6 uV (75 ohms)
41.2 dBf
Audio output frequency range:
30 Hz to 15 kHz,
+.5 dB, -3 dB
AM Tuner Section
AM range: 530-1710 kHz
10 kHz steps
(9 kHz for some
export models)
Usable sensitivity: (30% mod.,
S/N 20 dB): 16 uV / (600 uV/m)
S/N (30% mod., 1 mV input): 48dB
Trigger Outputs
12 V Main and Zone 2 Trigger
current less than 500mA total
Main zone trigger relay contact
rating: 24 VDC 2A maximum
XLR Outputs
Pin 1 Ground
Pin 2 Positive
Pin 3 Negative
Infrared Inputs
Optically Isolated
Standard 1/8” mini jacks
Standard 12V signal level
Power Requirements
120 VAC 50-60 Hz: 40 W
Dimensions
Architect's Choice:
17” Wide x 5.75” High x 16.5” Deep
Standard Model:
19" Wide x 6.5" High x 15.5” Deep
Net Weight
Architect's Choice: 22 lbs
Standard Model: 24 lbs