Filter
Top Products
9-27
DFP-3000
1. Connecting DTS-6 to the AUX1 Input Terminal
Connect Pins 13 (DTS S/W Enable Output) of the DTS-6 STEREO connector and 34 (Lip+, AUX1
Fallback Input) of the DFP-D3000 Automation connector.
Connect Pin 8 (GND) of the DTS-6 STEREO connector and Pin 14 of the DFP-D3000 Automation
connector (Logic Common). The following shows a specific example of connections.
For audio signals, connect an adapter (DTS-6 option) for connecting the DTS-6 to the CP-500 to the
JM21 connector of the DTS-6, and use the D-Sub 25-pin of this adapter to connect the AUX1 connector
of the DFP-D3000. Refer to Section 9.7.5 of this manual for details of the connector pin assignment.
1. Overall System Configuration
2. Connection of Controller (Including Pin Assignment)
AUX1 Input
DTS Inc. DTS-6 DFP-D3000
Automation
Input /Output